
| mm | 3 | 5 | 6 | 8 | 10 | 12 | 15 | 20 | 25 |
|---|---|---|---|---|---|---|---|---|---|
| M2.5 | |||||||||
| M3 | |||||||||
| M4 | — | ||||||||
| M5 | — | — |
Selected: Brass · choose a size from the chart
Available in Brass, Stainless Steel 304, Aluminum and Steel Zinc Plated. Standard sizes (Metric thread (ISO 261)): M2.5 (3-25mm), M3 (3-25mm), M4 (5-25mm), M5 (6-25mm). Request a quote for your exact requirement.
Blind Stand Offs are cylindrical spacers with a threaded hole on one side and a closed end on the other. This blind design allows secure mounting without exposing threads or requiring a through-hole on the opposite surface. Perfect for electronic and structural assemblies, Blind Stand Offs ensure precise spacing, clean aesthetics, and strong, reliable support in compact or sensitive setups.
Common uses and specifications for Blind Stand Off:
Blind Stand Offs are available in Brass, SS 304, Aluminum and Steel Zinc Plated. Choose the material based on the load, the corrosion exposure and the material of the mating parts.
Choose the thread size to match the mounting screw, typically M2.5, M3 or M4, and the body length to give the required gap between the board or panel and the base. ScrewBazar can match a size from a drawing or sample.
Blind Stand Offs are supplied to common metric dimensions. State the required DIN, ISO or IS standard on your enquiry, or send a drawing or sample, and ScrewBazar will match it.
Blind Stand Offs are supplied in M2.5 to M5, lengths 3 mm to 25 mm. The size availability table on this page shows every standard size by material; sizes outside it are not manufactured to the standard but can be made to a drawing.
Yes. ScrewBazar supplies blind stand offs in packs and in bulk quantities for production and maintenance. Use Request a Quote with the size, material and quantity you need, or send a drawing or sample.