
| mm | 9.5 | 13 | 16 | 19 | 22 | 25 | 32 | 38 | 45 | 50 |
|---|---|---|---|---|---|---|---|---|---|---|
| ST2.9 | โ | โ | โ | โ | โ | โ | ||||
| ST3.5 | โ | โ | โ | |||||||
| ST3.9 | โ | โ | ||||||||
| ST4.2 | โ | โ | ||||||||
| ST4.8 | โ | โ | ||||||||
| ST5.5 | โ | โ | โ | |||||||
| ST6.3 | โ | โ | โ | โ |
Selected: Carbon Steel ยท choose a size from the chart
Available in Carbon Steel, Stainless Steel 410 and Galvanized Steel. Standard sizes (DIN 7504 N / ISO 15481): ST2.9 (9.5-19mm), ST3.5 (9.5-32mm), ST3.9 (9.5-38mm), ST4.2 (13-45mm), ST4.8 (16-50mm), ST5.5 (19-50mm), ST6.3 (22-50mm). Request a quote for your exact requirement.
Pan Self-Drilling Screws feature a rounded, low-profile pan head combined with a drill-point tip that cuts its own hole during installation. This design allows quick fastening without pre-drilling while providing strong, reliable joints in sheet metal and light construction applications. They are widely used for their convenience, clean appearance, and consistent performance. Also commonly known as Tek Screw or Teks Screw in the trade.
Pan Self-Drilling Screws (Tek Screw, Teks Screw, Drill Point Screw, SDS) are threaded fasteners used in industrial and construction applications. They are commonly made to DIN 7504 N and ISO 15481. ScrewBazar supplies pan self-drilling screws in Carbon Steel, SS 410 and Galvanized Steel. Typical uses include machinery and equipment assembly, electrical panels and enclosures and sheet metal fabrication.
Pan Self-Drilling Screws are available in Carbon Steel, SS 410 and Galvanized Steel. Choose the material based on the load, the corrosion exposure and the material of the mating parts.
Pan Self-Drilling Screws are used in machinery and equipment assembly, electrical panels and enclosures, sheet metal fabrication, appliance manufacturing and maintenance and repair. They are supplied to the automotive, industrial machinery, electrical and appliances sectors.
Choose the thread size from the hole or nut it must fit, then pick a length that gives full thread engagement of at least one diameter in steel and 1.5 to 2 diameters in aluminium or plastic. ScrewBazar can match a size from a drawing or sample.
Pan Self-Drilling Screws are supplied in ST2.9 to ST6.3, lengths 9.5 mm to 50 mm. The size availability table on this page shows every standard size by material; sizes outside it are not manufactured to the standard but can be made to a drawing.
Yes. ScrewBazar supplies pan self-drilling screws in packs and in bulk quantities for production and maintenance. Use Request a Quote with the size, material and quantity you need, or send a drawing or sample.
Pan Self-Drilling Screws are commonly made to DIN 7504 N and ISO 15481. State the standard on your enquiry so dimensions and tolerances match your drawing.