Truss Phillips SDS (Tek Screw)

Product

Carbon Steel

DIN 7504 (wafer head)
mm9.5131619222532384550
ST3.5———
ST4.2——
ST4.8——
ST5.5———
In stock— Not manufactured

Selected: Carbon Steel · choose a size from the chart

Available in Carbon Steel, Stainless Steel 410 and Galvanized Steel. Standard sizes (DIN 7504 (wafer head)): ST3.5 (9.5-32mm), ST4.2 (13-45mm), ST4.8 (16-50mm), ST5.5 (19-50mm). Request a quote for your exact requirement.

Wafer Head Self-Drilling Screws feature an extra-wide, low-profile head that provides a large bearing surface for better load distribution on thin sheet metal. Ideal for metal roofing, siding, and HVAC ductwork. Also commonly known as Tek Screw or Teks Screw in the trade.

About Truss Phillips SDS

Truss Phillips SDS (Tek Screw, Teks Screw, Drill Point Screw, SDS) are threaded fasteners used in industrial and construction applications. They are commonly made to DIN 7504. ScrewBazar supplies truss phillips SDS in Carbon Steel, SS 410 and Galvanized Steel. Typical uses include machinery and equipment assembly, electrical panels and enclosures and sheet metal fabrication.

Applications

  • •Machinery and equipment assembly
  • •Electrical panels and enclosures
  • •Sheet metal fabrication
  • •Appliance manufacturing
  • •Maintenance and repair

Specifications

Materials
Carbon Steel, SS 410, Galvanized Steel
Size range
ST3.5 to ST5.5, lengths 9.5 mm to 50 mm
Standards
DIN 7504

Industries served

  • Automotive
  • Industrial machinery
  • Electrical
  • Appliances

Related categories

Truss Phillips SDS: frequently asked questions

What materials are truss phillips SDS available in?

Truss Phillips SDS are available in Carbon Steel, SS 410 and Galvanized Steel. Choose the material based on the load, the corrosion exposure and the material of the mating parts.

Where are truss phillips SDS used?

Truss Phillips SDS are used in machinery and equipment assembly, electrical panels and enclosures, sheet metal fabrication, appliance manufacturing and maintenance and repair. They are supplied to the automotive, industrial machinery, electrical and appliances sectors.

How do I choose the right size of truss phillips SDS?

Choose the thread size from the hole or nut it must fit, then pick a length that gives full thread engagement of at least one diameter in steel and 1.5 to 2 diameters in aluminium or plastic. ScrewBazar can match a size from a drawing or sample.

What sizes of truss phillips SDS are available?

Truss Phillips SDS are supplied in ST3.5 to ST5.5, lengths 9.5 mm to 50 mm. The size availability table on this page shows every standard size by material; sizes outside it are not manufactured to the standard but can be made to a drawing.

Can I order truss phillips SDS in bulk?

Yes. ScrewBazar supplies truss phillips SDS in packs and in bulk quantities for production and maintenance. Use Request a Quote with the size, material and quantity you need, or send a drawing or sample.

Which standards do truss phillips SDS follow?

Truss Phillips SDS are commonly made to DIN 7504. State the standard on your enquiry so dimensions and tolerances match your drawing.