
| Size | M3 | M4 | M5 | M6 | M8 | M10 | M12 | M14 | M16 |
|---|---|---|---|---|---|---|---|---|---|
| DIN 929 |
Selected: Mild Steel · choose a size from the chart
Available in Mild Steel, Stainless Steel 304 / A2-70 and Zinc Plated. Standard sizes (DIN 929): M3, M4, M5, M6, M8, M10, M12, M14, M16. Request a quote for your exact requirement.
Weld Nuts are permanently welded to metal components to provide strong, captive threaded points. Their designs (tabs, projections, pilots) help ensure accurate placement and robust weld joints in manufacturing and assembly processes. Also commonly known as Hex Weld Nut or Projection Weld Nut in the trade.
Weld Nuts (Square Weld Nut, Hex Weld Nut, Projection Weld Nut) are internally threaded fasteners used in industrial and construction applications. They are commonly made to DIN 929. ScrewBazar supplies weld nuts in Mild Steel, SS 304 and Zinc Plated. Typical uses include bolted joints in machinery, structural frameworks and automotive assemblies.
Weld Nuts are available in Mild Steel, SS 304 and Zinc Plated. Choose the material based on the load, the corrosion exposure and the material of the mating parts.
Weld Nuts are used in bolted joints in machinery, structural frameworks, automotive assemblies, equipment manufacturing and maintenance and repair. They are supplied to the automotive, industrial machinery, construction and manufacturing sectors.
Match the nut to the thread size and pitch of the bolt or stud, for example M8 x 1.25 coarse. Use a nut grade equal to or higher than the bolt grade. ScrewBazar can match a size from a drawing or sample.
Weld Nuts are supplied in M3 to M16. The size availability table on this page shows every standard size by material; sizes outside it are not manufactured to the standard but can be made to a drawing.
Yes. ScrewBazar supplies weld nuts in packs and in bulk quantities for production and maintenance. Use Request a Quote with the size, material and quantity you need, or send a drawing or sample.
Weld Nuts are commonly made to DIN 929. State the standard on your enquiry so dimensions and tolerances match your drawing.