
| mm | 16 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 | 160 | 180 | 200 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M5 | — | — | — | — | — | — | — | — | — | — | |||||||||||||
| M6 | — | — | — | ||||||||||||||||||||
| M8 | — | ||||||||||||||||||||||
| M10 | — | ||||||||||||||||||||||
| M12 | — | — | — | ||||||||||||||||||||
| M16 | — | — | — | — | — | — | — |
Selected: Galvanized Steel · choose a size from the chart
Available in Galvanized Steel, Stainless Steel 304 / A2-70 and Mild Steel. Standard sizes (DIN 603): M5 (16-80mm), M6 (16-150mm), M8 (20-200mm), M10 (20-200mm), M12 (30-200mm), M16 (50-200mm). Request a quote for your exact requirement.
Carriage Bolts (also called Coach Bolts) feature a smooth, rounded head with a square section beneath that prevents rotation. The square neck bites into wood for secure fastening without the need to hold the bolt head. Also commonly known as Cup Square Bolt or Round Head Square Neck Bolt in the trade.
Carriage bolts are bolts with a smooth domed head and a square neck directly under the head. They are also called coach bolts, cup square bolts or round head square neck bolts. The standard is DIN 603, with ISO 8677 as the international equivalent. The square neck is pulled into a round hole in timber, or fits a square hole in steel, and stops the bolt turning while the nut is tightened. This means the bolt can be fastened from the nut side with one spanner. The domed head has no drive, so the bolt cannot be removed from the head side. This makes carriage bolts suited to timber construction, fencing and security fixings. They are commonly made in property class 4.6 and 8.8 steel, hot-dip galvanised steel and SS 304.
In India and the UK, coach bolt and carriage bolt usually mean the same DIN 603 part: a domed head with a square neck. In the US, a coach bolt can also mean a lag screw with a hex head. Check the head shape when ordering.
Drill a hole equal to the nominal bolt diameter, for example a 10 mm hole for an M10 carriage bolt. Tap the bolt in and tighten the nut. The square neck pulls into the wood and locks the bolt against turning.
Use a washer under the nut, not under the head. In timber, a large DIN 9021 or fender washer under the nut stops it sinking into the wood. The domed head already has a wide bearing face.
Use hot-dip galvanised carriage bolts for general outdoor timber and SS 304 or SS 316 for coastal sites or treated timber that contains copper. Zinc-plated mild steel bolts are intended for indoor use only.
Yes, if the metal has a square hole to match the neck, as in many shelving systems and channel frames. In a round hole in metal the neck cannot grip, and the bolt will spin while the nut is tightened.