Machine Screws Supplier in Bangalore — ScrewBazar Complete Range

Bangalore is India's most technically demanding manufacturing city. The concentration of electronics OEMs, EV startups, aerospace sub-contractors, medical device manufacturers, and precision engineering firms creates a fastener supply challenge that general hardware distributors cannot reliably meet. Electronics manufacturers in Electronic City and Whitefield build PCB assemblies with M2 and M3 machine screws where dimensional tolerance is critical — a variation in head height can jam an automated assembly line. Automotive component manufacturers in Peenya Industrial Area specify Grade 10.9 and 12.9 machine screws for engine and chassis sub-assemblies where proof-load requirements are non-negotiable. Defence electronics contractors and aerospace sub-tier suppliers across the city require SS304 machine screws with full material traceability documentation. Medical device assemblers need clean-grade machine screws with batch certification. All these buyers need a single supplier who stocks the right material in the right size — and can confirm availability and dispatch the same day the order is placed. That is the standard ScrewBazar holds itself to as a machine screws supplier in Bangalore.

SHCS (Socket Head Cap Screws), also called Allen screws, feature a tall cylindrical head with internal hex socket. The high head profile provides deep socket engagement for maximum torque without cam-out — the default machine screw for precision machinery, CNC fixtures, and robotics assembly. BHCS (Button Head Cap Screws) have a low-profile rounded head used wherever protrusion must be minimised: furniture, consumer electronics housings, and architectural metalwork. CSK (Countersunk) machine screws sit flush with the material surface when installed in a countersunk hole — essential for panels, hinges, door hardware, and any application where a protruding head would snag or interfere. Pan head screws have a slightly domed top surface with flat underside, giving the largest bearing area of any non-flanged machine screw head style — the most common configuration in electronics and appliance assembly, PCB mounting, control panel fabrication, and HVAC equipment. Cheese head screws have a cylindrical flat-topped head providing good bearing surface in a lower profile than SHCS — used in precision instruments, gauge assemblies, and equipment where the head must fit inside a recessed bore. Dome head screws have a hemispherical top for decorative visible applications — furniture, consumer goods, and architectural fixtures where the fastener is intentionally exposed. All head types are stocked at ScrewBazar in Phillips, Allen, and Torx drives.

Browse Machine Screws →

Drive type selection is a practical choice driven by your installation tooling and torque requirement. Allen (hex socket) drives accept hex keys and socket bits, providing the highest torque-to-head-size ratio with minimal cam-out — the preferred drive for machinery, robotics, and precision assembly across Bangalore's engineering sector. Phillips drives are the most common in India for light-to-medium torque applications. The self-centering action makes them efficient for power tool use in high-volume assembly, though maximum torque is limited compared to Allen or Torx. Torx (six-point star) drives combine high torque transfer with near-zero cam-out, increasingly specified in Bangalore's automotive assembly and server rack manufacturing where power tools must operate at full torque without risking screw head damage. Slotted drives remain relevant for field maintenance where a flat-blade driver is always available, for decorative applications, and for servicing older equipment where slotted configurations are standard. ScrewBazar stocks machine screws in Allen, Phillips, and Torx drives across all common head types and materials.

Material selection determines how long the machine screw will last in its environment and whether it causes problems with electrical conductivity or galvanic corrosion. Stainless steel SS304 is the most widely specified material among Bangalore's electronics and food processing buyers. It resists atmospheric corrosion, food acids, and humidity — standard for PCB assemblies, control panels, kitchen equipment, and outdoor enclosures. Tensile strength is approximately 600–700 MPa. SS316 adds molybdenum to the SS304 composition for superior resistance to chlorides and chemical attack — specified by Bangalore's pharmaceutical companies, biotech instrument makers, and any installation near coastal or industrial chemical environments. Brass machine screws offer electrical conductivity, corrosion resistance, and non-magnetic properties — used for earthing connections, battery terminal fastening, and decorative applications. Nylon machine screws are fully non-conductive and non-corrodible — essential in electronics assemblies where metal screws would create short-circuit risk, and in chemical environments where metal would corrode. High-tensile steel machine screws in Grade 8.8, 10.9, and 12.9 zinc-plated are the workhorses of machinery assembly, automotive, and heavy fabrication. Grade 12.9 provides 1200 MPa tensile strength, specified in robotics, CNC clamping fixtures, and heavy equipment where the highest strength-to-size ratio is required.

ScrewBazar stocks machine screws from M1.6 — used in miniature electronics, precision instruments, and medical devices — through M12 for structural connections and heavy machinery. Most Bangalore buyers concentrate in the M2 to M8 range. M2 and M2.5 are standard in consumer electronics, laptop and tablet assembly, medical devices, and sensor mounting. M3 and M4 are the most consumed sizes across the city: M3 is the standard PCB screw size in Indian electronics manufacturing, and M4 covers control panel assembly and appliance manufacturing. M5 and M6 suit machinery brackets, motor mounting, furniture, and general fabrication. M8, M10, and M12 are used for heavy machinery, automotive sub-assemblies, and structural connections. Length range runs from 4mm to 120mm for most sizes, in 5mm increments up to 50mm and 10mm increments beyond. When specifying machine screw length, calculate the required thread engagement — typically 1.5x to 2x screw diameter in steel, 2x to 2.5x in aluminium — plus the material thickness being fastened through. Contact ScrewBazar if the size you need is not visible in the standard catalogue; our team can confirm availability or advise on alternatives.

Electronics manufacturing is the single largest consumer of machine screws in Bangalore. Electronic City Phase 1 and 2, and the ITPB corridor in Whitefield, house hundreds of electronics OEMs and contract manufacturers consuming millions of M3 and M4 machine screws monthly for PCB mounting, chassis assembly, and cabinet fabrication. EV manufacturing in Bommasandra and Jigani Industrial Estate is a rapidly growing segment: battery pack assembly, motor controller mounting, and BMS enclosures require non-conductive nylon screws for electrical isolation alongside Grade 10.9 or 12.9 screws for structural connections. Aerospace and defence sub-contractors near HAL Airport Road and in the Aerospace SEZ specify machine screws with material certifications — SS304 and Grade 12.9 with batch traceability are the standard requirements. Furniture and joinery manufacturers in Peenya Industrial Area use M4 and M5 zinc-plated machine screws at high volume for flat-pack assembly, hinge mounting, and bracket fabrication. Medical device assembly companies in Koramangala and Marathahalli require clean-grade machine screws — SS316 for device bodies and nylon for insulated subassemblies in diagnostic and therapeutic equipment.

For standard stock sizes, orders can be placed through the ScrewBazar website with same-day dispatch confirmation for orders placed before 2 PM. For bulk orders above 1000 pieces, send your specification to our team — head type, drive, material, size, length, and quantity. We confirm stock availability, unit price, packaging format, and delivery timeline within a few hours. Bulk orders are packed in sealed bags at standard counts (typically 100 or 500 per bag) with full specification labels, or in bulk cartons for direct production line intake. Material certifications for stainless steel and high-grade orders are issued at despatch and can be sent digitally or included with the shipment. For recurring production requirements, a scheduled supply arrangement can be set up against your monthly or quarterly forecast — we maintain a dedicated stock allocation and replenish automatically, eliminating the need for repeat ordering and removing stockout risk from your production schedule.

ScrewBazar serves Bangalore's manufacturing sector from local stock — not a distant warehouse that adds two or three days to every order. Standard stock sizes ship same-day for orders placed before 2 PM. The range covers all common head types (SHCS, BHCS, CSK, pan head, cheese head, dome head) across Allen, Phillips, and Torx drives, in SS304, SS316, nylon, brass, and zinc-plated high-tensile steel, from M1.6 to M12. Material authenticity is guaranteed — every SS304 batch is sourced from certified steel, not ungraded material relabelled as stainless. Bulk pricing is available at 1000, 5000, and 20,000+ piece thresholds with no minimum order quantity for standard sizes. Technical support is available for specification questions — our team can help identify the right grade, drive, and head type if you are sourcing a machine screw for the first time or need a second opinion on a substitution. Call, WhatsApp, or email our team directly for urgent production requirements or to set up a scheduled supply arrangement.

Get Bangalore Pricing →